Universal T70 Turbo Turbocharger T3 .82 A/R + Oil Drain Return FEED Line Kit TCD
Notice: This product must be installed by a licensed mechanic and used in compliance with local modification regulations. Due to state emissions regulations, this product cannot be sold or shipped to customers in California (CA) or New York (NY).
Application
Perfect for all 1.8L-3.0L engines
Horse Power: Boost Horse Power up to 600HP
Cooling Type: Oil Cooled
Specification
Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet (Downpipe) Flange: V-Band Flange
Turbine Trim: 62
Turbine Inducer Diameter: 74.4 mm
Turbine Exducer Diameter: 58.4 mm
Turbine A/R: 0.7
Compressor Trim: 57
Compressor Inducer Diameter: 56.6 mm
Compressor Exducer Diameter: 75 mm
Compressor A/R: 0.7
Bearing: Journal Bearing
Warranty: one year
Internal Wastegate: NO
* OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm
* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm
* Notes: This is a universal oil line kit. Not all the component parts will be directly bolt on your car.
You may still need some accessaries of your OEM oil line kit.
Notice
* Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.
* This is universal application turbo, so modification might be required for some vehicles.
* Professional installation is highly recommended (No Instruction Included).
* For any needs please contact us.
* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding.