10 PCS T3/T4 Turbo Kits compatible for 92-00 Civic EG EK/EJ DelSol Sohc D15 D16 350HP
SKU
3002905845
10 PCS T3/T4 Turbo Kits compatible for 92-00 Civic EG EK/EJ DelSol Sohc D15 D16 350HP
Notice: This product must be installed by a licensed mechanic and used in compliance with local modification regulations. Due to state emissions regulations, this product cannot be sold or shipped to customers in California (CA) or New York (NY).
Application:
Compatible for 1992-2000 compatible for Honda Civic (Except Civic Si EM1)
Compatible for 1993-1997 compatible for Honda Del Sol (Excelt V-tec)
Specification:
1 x T3/T4 Turbo Charger:
Compressor Inlet Diameter: 72mm(2.8")
Compressor Outlet Diameter: 53mm（2"）
Oil Inlet: 1/8 NPT
Exhaust Inlet (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns
Exhaust Outlet (Downpipe) Flange: 5 bolt Flange
Turbine Trim: 74.2
Turbine Inducer Diameter: 64.8 mm
Turbine Exducer Diameter: 55.8mm
Turbine A/R: 0.63
Compressor Trim: 48.1
Compressor Inducer Diameter: 52.7mm
Compressor Exducer Diameter: 76 mm
Compressor A/R: 0.5
Bearing: Wet Float Bearing
Turbocharger Overall size: 270*220*220
1xmanifold：T3 flange 35mm or 38mm wastegate flange Cast Iron
1xTurbo Downpie: 2.5" t3/t4 5-bolt stainless steel TIG welded downpipe.
1x intercooler piping kit:
intercooler:
Inlet size is 2.5 inch.
core size: 21*7*2.5.
Overall Size 27'' x 7'' x 2.5'' inch.
Support up to 350 hp for this small intercooler size - tube and fin style .
intercooler piping:
2.25" Alumnium Prenbent Mandrel Bends Piping
Comes with High Pressure Silicone Hoses and T-blot clamps
1 x Type-S Blow Off Valve: CNC Billet Aluminum Type RS Style Blow off Valve and 2.5" Inch Type S/Rs Flange Pipe. 25PSi Boost! Can hold up to 1000+ HP.
1 x 35/38MM Wastegate: 35/38mm External Waste Gate Kit
1x 5'' 4 in 1 Tachometer:
Water Temp Unit Type: Celsius
Water Temp Display Range: 40~120 Celsius
Oil Temp Unit type: Celsius
Oil Temp Display Range: 50~150 Celsius
Oil Pressure Unit Type: Bar
Oil Pressure Display Range: 0~7 Bar
Thread Size of Sensors: 1/8NPT
1 x Turbo Boost Controller: Up To 30 PSi Boost
1 x Turbo Oil Return / Feeding Line Kit: Turbo Oil Feed + Return Drain Line Kit Combo. It helps circulate oil from the turbo charger to the oil pan. The kit provides a anodized look, and gives a best cooling performance on your turbo and long lasting life.
Material: Stainless Steel Braided
1x Air filter: Fits with any aftermarket pipe of 3" diameter
Package included:
1x T3/T4 Turbocharger
1x Manifold
1x Downpipe
1x Turbo Intercooler Piping Kit
1x Oil Feed / Return Line
1x 35/38mm Wastegate
1x Type-S Blow Off Valve
1x Tubo Boost Controller
1x Air filter
1x 5inch 4in 1 Tachometer
Feature:
1.Turbo charger:
* Capable of Boosting Horse Power up to 400+ HP
* Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 ℃
* Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 ℃
* Cast aluminium blades with good gas tightness and corrosion resistance.
2.Manifold
*Direct replacement
*Replaces original manifolds that are cracked from thermal expansion and contraction
3.Downpipe
*Made of high quality T-304 stainless steel with computerized mandrel-bends
i.e. Maximizing smoothest exhaust airflow
TIG welded CNC machine flange for strength and durability
Increase engine output and efficiency. Gain 10 - 15 HPs (approximately)
O2 Sensor Bungs insertion, bolt(s) and metal gasket(s) included
4. Intercooler piping kit
intercooler
* core size:21*7*2.5 cools down the turbocharged air efficiently
* Lightweight aluminum racing intercooler，
* Strong TIG welds will support high PSI levels
Intercooler piping
* Made of 6061 aluminum
* Lightweight yet strong aluminum piping
5.Boost controller
* Can be setup to adjust boost PSI on the fly
* Can be adjusted for any PSI level desired
* Control your boost with a precise click
* Includes complete install kit
* Anodized aluminum finish
* CNC machined design
* High pressure silicone couplers and T-bolt clamps
6. Turbo Oil returen /Feeding line kit
* Stainless Steel Braided
* Includes complete install kit
* It helps circulate oil from the turbo charger to the oil pan.
* The kit provides a anodized look
* gives a best cooling performance on your turbo and long lasting life.
7.Blow Off Valve Kit
* CNC Billet Aluminum Type RS Style Blow off Valve
* Easy Mount Piping Set Included For Bolt-On.
* Including all necessary hardwares.
* easily adjustable to prevent both permature boost leakage and compressor surge.
* Fast response One For Low And High Boost Pressure.
* Performance design produces a powerful and aggressive sound
* Quality design will not leak under high boost conditions
* Flanges can be installed at user discretion
8. 38MM Wastegate
* Most reliable wastegates For competition vehicles.
* accurate boost control
* high quality appearance features Dual port design
* comes with waste gate spring (fully adjustable, up to 15 psi), allow you to add the spring to get desired high psi.
9. Air fiter
* Plate and Mesh made out of high quality stainless steel to keep it from rusting on cold air or high moisture locations
*Great for cars with very limited space to place a filter
10.5'' 4 in 1 Tachometer:
* Comes with All the Wiring Necessary for Installation.
* All Accessories are Included for Installation.
* Back lit for use at night time
Notice:
* Need modifications - Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it's recommended to advanced players but not for beginners. )
* we will not be responsible for man-made installation damage.